The displayed content is also available in English. Change language

Are your cycles taking too long?

Jump to main content
<p>(Too) long cycles<br />cost money.</p>
Hidden costs

(Too) long cycles
cost money.

High cycle times often go unnoticed - but in the end, the lost seconds add up to considerable costs.

Inefficient processes not only slow down production, but also your growth.

Every second counts

Even small optimizations add up to massive savings over the entire service life.

6 areas of adjustment for
shorter cycle times

<p>6 areas of adjustment for<br /><strong>shorter cycle times</strong></p>

1. Perfect mixing ratio

With our patented SPLITNEX technology, we guarantee an exact 50/50 ratio of A and B - air-free and pulsation-free. This can reduce the curing time and saves valuable time per cycle.

<p>6 areas of adjustment for<br /><strong>shorter cycle times</strong></p>

2. Mold temperature

A constant and homogeneous temperature in the mold is crucial for fast curing. We can advise you on how to optimize temperature control and insulation.

<p>6 areas of adjustment for<br /><strong>shorter cycle times</strong></p>

3. Mold movement

Optimized opening, closing and demoulding movements reduce downtimes. With targeted process consulting, we help to make movement sequences more efficient.

<p>6 areas of adjustment for<br /><strong>shorter cycle times</strong></p>

4. Mold concept & demolding

A well thought-out mold design with the right demolding concept speeds up production and reduces errors. We provide support with the design.

<p>6 areas of adjustment for<br /><strong>shorter cycle times</strong></p>

5. Vacuum efficiency

Good vacuum efficiency prevents air pockets and shortens cycle times. Together, we check the efficiency of existing systems and advise on improvements.

<p>6 areas of adjustment for<br /><strong>shorter cycle times</strong></p>

6. Direct gating

Sprue-free direct gating shortens the cycle and saves rework. We show you how to optimally integrate this technology into your production.

Let's optimize your cycle time.

Contact us
<p>Reduce cycle times - Increase efficiency.</p>
Faster production, without compromise.

Reduce cycle times - Increase efficiency.

Every second counts in LSR injection molding. (Too) long cycle time are caused, for example, by inaccurate mixing ratios, suboptimal mold temperatures or slow demolding.

Process know-how
We take a holistic view of the entire injection molding process and advise on where seconds can be saved - from mold movement to demolding.
Most efficient dosing systems
Our dosing technology delivers the most precise mixing ratio and ensure shorter curing times - the basis for stable, shorter cycles.
Tried and tested practical solutions
Results from hundreds of projects flow directly into your solution. This makes optimization calculable - with immediately measurable effects.
Future proof
We rely on patented technology that not only ensures efficiency today, but is also prepared for future requirements.

Success stories,
that speak for themselves.

Dymotek

22% Cycle time reduction

Together with Dymotek, we have reduced cycle times and significantly increased output - read more in the success story.

 

To the success stories

In Nexus, we have found a partner who really understands the challenges of high-end LSR processing.
Rob Theriaque Senior Process Engineer, Dymotek
Dymotek